The Camera IP Core is small and flexible video data coverter. It is connected to a typical video camera ICs with 8-bit digital video data, Horizontal synchronization and Vertical synchronization signals. The core is connected through FIFO to a WISHBONE bus on the other side. Both sides of the core can operate at fully asynchronous clock frequencies. The Camera IP Core convertes 4:2:2 YCbCr video data (sometimes called YUV, but not totally the same; Y is the same, while Cb and Cr are U and V multiplied by a constant) to a 24-bit RGB. 24-bit or 16-bit RGB data, downsampled from 24-bit RGB, is then sent to the system (video) memory, however conversion can also be by-passed. Interrupt can be generated after frame-buffer in system (video) memory is filled up or after setable number of horizontal lines written to frame-buffer.

Input and output data order can be set in a register as well as polarity of Horizontal and Vertical synchronization signals and Destination address of the first image frame data of a video image. The Camera core is totally independent from the input image size, since it controls the logic with Horizontal and Vertical synchronization signals, instead it provides two status registers with acquired screen size.

特色：

camera.rar